You have no items in your shopping cart.
local_shipping We ship to United States of AmericaDostava (US / USA 2) 110,03 €
Neumann Accuracy, Serious Bass and Power to SpareThe KH 150 is a powerful bi-amplified studio monitor with reference-class performance. Its 6.5” woofer in a bass reflex cabinet provides stunning low end and high SPL capability with undiminished clarity. DSP controlled electronics ensure linear phase response and allow for room-adaptive calibration via Neumann’s revolutionary MA 1 Automatic Monitor Alignment.What You Hear Is What You GetThe KH 150 follows the same philosophy as all Neumann studio monitors: highest linearity, lowest distortion, no coloration, and perfect adaptability to any acoustic environment. It allows you to hear every nuance of your tracks. Mixing becomes so much faster and easier, once the guesswork is over. And more creative, too: Sounds genius, but can I get away with that? Is that vocal bright or sibilant? Is it too much bass? The KH 150 will tell you. Honestly.One BiggerWhat differentiates the KH 150 from its smaller siblings is its deeper bass response down to 39 Hz. That’s almost as low as the larger KH 310, thanks to the KH 150’s novel 6.5” high-precision woofer in a carefully designed bass reflex cabinet. The KH 150 is thus ideally suited to urban music, EDM, film scoring, and all styles that require extended low end and/or elevated listening levels. Thanks to powerful amplifiers (145 W/100 W) and sophisticated protection limiters, no clarity is lost even at high SPLs. But, being a true universalist, the KH 150 works just as well for everything from rock to classical music, broadcast applications and voice-over work.The KH 150 has an exceptionally linear frequency response from 39 Hz to 21 kHz (±3 dB). Not only that: It also linearizes the phase response! Which translates to clear mids with astonishing transparency as well as extreme accuracy in the time domain: precise impulse reproduction and finely resolved reverbs. This is made possible by DSP controlled electronics which allow for sophisticated crossovers avoiding the phase distortion caused by analog filters. The internal DSP also realizes new standards in tonal consistency. The KH 150 is made to extremely low tolerances of no more than ± 0.8 dB! And you can hear it, too: Stereo imaging is razor-sharp. AES 67 – Audio over IPAdditionally, the KH 150 AES67 model variant offers integrated redundant AES67 audio network ports that are fully compliant with broadcast standards such as ST 2110, ST 2022-7 redundancy, and RAVENNA. At the same time, the KH 150 AES67 is compatible with DANTE®-generated AES67 network streams.
• High-precision drivers, Mathematically Modelled Dispersion™ (MMD™) waveguide• Linear frequency response 39 Hz … 21 kHz (±3 dB)• Linear phase response 105 Hz … 16 kHz (± 45°) with latency < 2,6 ms• DSP engine allows for room adaptive calibration via Neumann’s MA 1• Razor-sharp imaging due to extremely low tolerances (± 0.8 dB)• May be combined with other KH line speakers in immersive/surround setups
• Free field frequency response ±6 dB: 36 Hz ... 21 kHz• Free field frequency response ±3 dB: 39 Hz ... 20.4 kHz• Pass band free field frequency response: 42 Hz … 20 kHz, ±1.25 dB• Free field frequency linearity deviation between 100 Hz and 10 kHz ±0.8 dB• Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 118.7 dB SPL• Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz): 107.5 dB SPL• Dolby D.A.R.D.T. Max SPL fullrange: 114 dB• Dolby D.A.R.D.T. Max SPL bass managed 120 dB• Recommended Listening Distance: 1.0 … 2.5 m; (3'… 8')• Acoustic principle: Bassreflex, Ports at the front• Analog input(s): XLR: analog electronically balanced• Analog input impedance: 24 kOhms• Max. input level: +24 dBu for 94 dB SPL setting; +14 dBu for 100 dB SPL setting; +9 dBu for 108 dB SPL setting; -1 dBu for 114 dB SPL setting• Signal routing modes: analog, S/PDIF L, S/PDIF R, S/PDIF mono• Digital input(s): RCA (75 Ω): S/PDIF• Digital output(s): RCA (75 Ω): S/PDIF• Max. Input Level; pk-pk, unbalanced / balanced 1.2 V• Digital converter: resolution; design: 24 Bit• Digital converter: sampling rate: 32 kHz..200 kHz• Digital internal sampling rate: 48 kHz• Output sample rate: identical to input sample rate• Latency ADA / DA: Analog Input: 2.6 ms; SPDIF Input: 2.1 ms• Delay: User adjustable delay range: 0 … 120 ms• Input gain control (sensitivity): 0 dB ... -15 dB• Output level control (output level in 1 m based on 0 dBu input level): 94; 100; 108; 114 dB SPL• Equalization: Bass 0; -2; -4; -6 dB• Equalization: Low-Mid 0; -2; -4; -6 dB• Equalization: Treble +1; 0; -1; -2 dB• Input selector: Analog; S/PDIF L; S/PDIF R; Mono• Ground Lift: Yes• Control: Local; Network• Mains Switch: Yes• Mains Voltage Select: Universal Power Supply 100 V~ … 240 V~• Controller design Digital; active• Crossover frequency: 1700 Hz• Crossover slope: 24 dB / octave• Automatic room calibration via MA 1: Yes• FIR phase correction: Linear phase (105 Hz ... 16 kHz; +/- 45°)• Remote control: MA 1 software via an RJ45 connector carrying standard IP data• Display: On; Normal Operation Neumann logo “White”• Display: Identification: Neumann logo “Rosé”• Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute: Neumann logo “Red”• Logo Brightness: via MA 1 software• Output power woofer amplifier (THD+N with limiter deactivated: 10%): 145 W• Mains Power Supply: input voltage; frequency 100-240 V; 50/60 Hz• Power consumption (230 V / 100 V): Standby: 0.3 W• Power consumption (230 V / 100 V): Idle: 15 W• Power consumption (230 V / 100 V): Full output: 320 W• In-rush current (Peak): 33 A• Standby automatic, 90 mins (default); user defined in software• Cabinet material: Composite polycarbonate front and rear, wooden sleeve• Cabinet surface finish; color (front / back) Painted; metallic anthracite (RAL 7021) / Black (RAL 9005)• Operating conditions: +10° C to +40° C (+50° F to +104° F); <75% RH, non-condensing• Woofer: 165 mm; (6.5") with protecting black metal grille• Tweeter: 25 mm; (1") with protecting black metal grille• Mounting points: 2 x M6 threaded inserts with 70 mm spacing on back panel; thread depth 15 mm; (5/8”)• Product dimensions (height x width x depth): 345 x 225 x 273 mm• Product weight: 8.0 kg